Funnel is a cylindrical object, used for the liquid and small powder objects into the inlet of the smaller container, mainly used for solid and liquid in the conical flask reaction to add liquid medicine, generally can also be used to replace the separation funnel.
The dimensions are all measured by hand, so there may be some errors. Please contact us for the specific freight.
1503 |
Funnel 600 approx, long stem |
|
Diameter(mm) |
O.D. of stem(mm) |
Length(mm) |
50 |
7 |
150 |
60 |
8 |
150 |
75 |
9 |
150 |
90 |
11 |
150 |
1504 |
Funnel 600 approx, short stem |
|
Diameter(mm) |
O.D. of stem(mm) |
Length(mm) |
40 |
7 |
40 |
50 |
7 |
50 |
60 |
8 |
60 |
75 |
9 |
75 |
90 |
11 |
90 |
100 |
13 |
100 |
120 |
15 |
120 |
150 |
17 |
150 |
180 |
18 |
150 |
210 |
21 |
160 |
240 |
24 |
180 |
300 |
26 |
200 |
5102 |
Funnel 60° Standard ground mouth |
O.D.of mouth(mm) |
Ground stopper |
30 |
10/19 |
40 |
10/19 |
40 |
14/23 |
40 |
19/26 |
60 |
14/23 |
60 |
19/26 |
BOROSILICATE GLASS |
|
BORO3.3 |
|
SiO2 Content | >80% |
Strain Point | 520°C |
Annealing Point | 560°C |
Softening Point | 820°C |
Refractive Index | 1.47 |
Light Transmission(2mm) | 0.92 |
Elastic Modulus | 67KNmm-2 |
Tensile Strength | 40-120Nmm-2 |
Glass stress Optical Coefficient | 3.8*10-6mm2/N |
Processing Temperature(104dpas) | 1220°C |
Linear Coefficient of Expansion(20-300°C) | 3.3*10-6K-1 |
Density(20°C) | 2.23gcm-1 |
Specific Heat | 0.9jg-1K-1 |
Thermal Conductivity | 1.2Wm-1K-1 |
Hydrolytic Resistance(ISO 719) | Grade 1 |
Acid Resistance(ISO 185) | Grade 1 |
Alkali Resistance(ISO 695) | Grade 2 |
Thermal Shock Resistance Rod6*30mm | 300°C |
1. Fold the filter paper in half and fold it twice to form a 90 ° center angle.
2. Put the stacked filter paper in three layers on one side and open one layer on the other side to form a funnel.
3.Put the funnel-shaped filter paper into the funnel. The side of the filter paper should be lower than the side of the funnel. Pour some water into the funnel mouth to make the soaked filter paper abut the inner wall of the funnel, and then pour the remaining clear water for use.
4.Place the funnel with the filter paper on the funnel holder for filtering (such as the ring on the iron stand), and place the beaker or test tube containing the filter liquid under the funnel neck, and place the tip of the funnel neck on the wall of the receiving container. Prevent liquid splashes.
5. When injecting the liquid to be filtered into the funnel, hold the beaker holding the liquid on the right and the glass rod on the left. The lower end of the glass rod is close to the three layers of filter paper. The beaker cup is close to the glass rod. The rod flows into the funnel. Note that the level of liquid flowing into the funnel cannot exceed the height of the filter paper.
6. When the liquid flows down the funnel neck through the filter paper, check whether the liquid flows down the cup wall and pour it to the bottom of the cup. If not, move the beaker or rotate the funnel so that the tip of the funnel is firmly attached to the wall of the beaker, so that the liquid can flow down the wall of the beaker.
Yancheng Huida Glass Instrument Co., Ltd. is the experienced manufacturer, mainly produces high quality laboratory glassware and other general labware. The band of “YCHD” boiling glass series and volumetric measuring instruments are well-known all over the world.