Which type of reagent is represented by the letter “C” on the label of the reagent bottle

Which type of reagent is represented by the letter “C” on the label of the reagent bottle

[Reagent Bottle Glass,Borosilicate Reagent Bottle,Wide Mouth Transparent Reagent Bottle,Chemical Reagent Bottle,Chemical Reagent Glass Bottles,Wide Mouth Reagent Bottles,1000ml Glass Reagent Bottle ]
There are thousands of types of chemical reagents, and their performance is different. The reagent bottle label is set to distinguish different types of reagents. Different letters represent different reagent types, and the letter “C” represents corrosive chemical reagents.[Reagent Bottle Glass,Borosilicate Reagent Bottle,Wide Mouth Transparent Reagent Bottle,Chemical Reagent Bottle,Chemical Reagent Glass Bottles,Wide Mouth Reagent Bottles,1000ml Glass Reagent Bottle ]
Corrosive reagents refer to reagents that are corrosive to skin, mucous membranes, eyes, respiratory organs, etc., including liquids and solids. For example, sulfuric acid, hydrochloric acid, hydrobromic acid, phosphoric acid and nitric acid among inorganic acids, and carboxylic acid and sulfonic acid among organic acids are corrosive. Phenol is also quite dangerous, can cause skin burns, and its toxic vapor can be absorbed by the skin. Strong bases such as sodium hydroxide and potassium hydroxide in inorganic bases, weak bases such as sodium sulfate and potassium sulfate are all corrosive, and amines, hydroxylamine, triethylamine, and pyridine in organic bases are all corrosive.[Reagent Bottle Glass,Borosilicate Reagent Bottle,Wide Mouth Transparent Reagent Bottle,Chemical Reagent Bottle,Chemical Reagent Glass Bottles,Wide Mouth Reagent Bottles,1000ml Glass Reagent Bottle ]
Liquid bromine is a very dangerous medicine. It can cause burns to the skin and eyes, so it must be used in a fume hood. In addition, due to its high density, when transferred with a dropper, even if the latex head is not squeezed, it may drip down due to its gravity. Therefore, be careful when using it. Thionyl chloride, acid chloride, anhydrous aluminum trichloride and some other reagents are also corrosive because they can react with water to release hydrogen chloride gas and cause serious irritation to the respiratory system.
If the letter on the label of the reagent bottle is “C”, it means that the bottle contains corrosive reagents. Be sure to wear protective gloves when handling or using such reagents. Once it splashes on the skin, it should be rinsed off immediately with plenty of water.[Reagent Bottle Glass,Borosilicate Reagent Bottle,Wide Mouth Transparent Reagent Bottle,Chemical Reagent Bottle,Chemical Reagent Glass Bottles,Wide Mouth Reagent Bottles,1000ml Glass Reagent Bottle ]

https://www.huidaglass.com/lab-bottles/


Post time: Oct-26-2021

Send your message to us:

Write your message here and send it to us