Welcome To Huida

How to choose reagent bottles for reagents that easily emit corrosive gases

Chemical reagents are high purity chemical substances used in production, scientific research and other departments to detect the composition, properties and quality of substances. Reagent Media Bottle,Reagent Bottle,Chemical Borosilicate Reagent Bottles,Reagent Bottle 1000ml  Most of them have certain toxicity and danger. The choice of reagent bottles according to the characteristics of the reagents is to ensure the stability of the reagents. The basics. So what kind of reagent bottle should I choose to store some reagents that are prone to volatilize corrosive gas?
Liquid bromine:
Liquid bromine has a high density, is very volatile, and is extremely toxic. Reagent Media Bottle,Reagent Bottle,Chemical Borosilicate Reagent Bottles,Reagent Bottle 1000ml  Bromine liquid on the skin can cause burns. Therefore, liquid bromine should be stored in a sealed brown grinded narrow-necked reagent bottle. In order to prevent its diffusion, it is generally necessary to add water to the liquid surface of the bromine to seal it. And then put the reagent bottle of liquid bromine tightly in the plastic tube, and place it in a cool place that is not easy to knock over. When taking it, use a dropper with a rubber tip into the liquid bromine below the surface of the water to quickly absorb a small amount, then seal it and place it in the restorative place.
Concentrated ammonia:
Concentrated ammonia water is very volatile, toxic, irritating and corrosive to the eyes, nose, and skin, and can suffocate people. The maximum allowable concentration in the air is 30mg/mm³. For concentrated ammonia, use a plastic stopper and a brown narrow-mouth reagent bottle with a screw cap, and store it in a cool place. When using, be very careful when opening the cap of the concentrated ammonia water bottle. Reagent Media Bottle,Reagent Bottle,Chemical Borosilicate Reagent Bottles,Reagent Bottle 1000ml  Due to the high pressure of the gas in the bottle, it is possible to rush out of the bottle and splash the ammonia. Therefore, cover the mouth of the reagent bottle with plastic film, etc., so that the mouth of the bottle does not face anyone, and then open the stopper. Especially in summer when the temperature is high, you can use cold water to cool down before using it.
Concentrated hydrochloric acid:
Concentrated hydrochloric acid is very easy to release hydrogen chloride gas, has a strong pungent odor and high, so it should be stored in a ground-necked narrow-necked reagent bottle, placed in a cool place, and stored away from concentrated helium water. When taking or preparing the solution of this kind of reagent, if the amount is larger and the contact time is longer, you should also wear a gas mask.
Strengthening the management of chemical reagents is a need to ensure the quality of analysis results, and it is also a necessary guarantee to ensure the safety of experiments. For reagents that easily emit corrosive gases, the rack for storing reagent bottles should not be too high, and should be placed on the ground against the wall to ensure safe storage.