Standard stopper is mainly used for the sealing of salt glass instruments and standard mouth instruments, there are certain requirements on the appearance and practicability, especially the ground surface should be fine, the taper should be accurate, so that it has a higher vacuum effect, the hollow plug is suitable for single mouth, three, all kinds of flasks, and the grinding mouth for bottle stopper; To take into account the heat problem, if it is solid, will be unevenly heated and easy to cause rupture, because a lot of time the hollow plug will come into contact with hot material.
The dimensions are all measured by hand, so there may be some errors. Please contact us for the specific freight.
5065 |
Standard Stopper hollow Standard ground mouth |
Ground mouth |
Length(mm) |
10/19 |
42 |
14/23 |
50 |
19/26 |
63 |
24/29 |
70 |
29/32 |
73 |
34/35 |
82 |
40/38 |
85 |
50/42 |
90 |
BOROSILICATE GLASS |
|
BORO3.3 |
|
SiO2 Content | >80% |
Strain Point | 520°C |
Annealing Point | 560°C |
Softening Point | 820°C |
Refractive Index | 1.47 |
Light Transmission(2mm) | 0.92 |
Elastic Modulus | 67KNmm-2 |
Tensile Strength | 40-120Nmm-2 |
Glass stress Optical Coefficient | 3.8*10-6mm2/N |
Processing Temperature(104dpas) | 1220°C |
Linear Coefficient of Expansion(20-300°C) | 3.3*10-6K-1 |
Density(20°C) | 2.23gcm-1 |
Specific Heat | 0.9jg-1K-1 |
Thermal Conductivity | 1.2Wm-1K-1 |
Hydrolytic Resistance(ISO 719) | Grade 1 |
Acid Resistance(ISO 185) | Grade 1 |
Alkali Resistance(ISO 695) | Grade 2 |
Thermal Shock Resistance Rod6*30mm | 300°C |
Borosilicate glass has excellent chemical and physical properties.The linear expansion cofficient of the primary hydrolyzable glass is 3.3 for applications requiring excellent chemical resistance and thermal resistance (including thermal shock resistance), as well as high mechanical stability. It is a typical glass for chemical equipment.
Frosted bottle mouth
Fine matte, thick and strong, each hollow plug is marked with size specifications.Hollow design, light weight overall.
About Standard Stopper
Standard Stoppers are mainly used for the plugging of experimental instruments and the sealing of standard mouth instruments. They have certain requirements on appearance and practicality, especially the matte surface must be thin and the taper must be accurate to make it have a high vacuum effect.
High borosilicate glass
Using high borosilicate as raw material, with high temperature resistance, low expansion rate, high strength, high light transmission
Yancheng Huida Glass Instrument Co., Ltd. is the experienced manufacturer, mainly produces high quality laboratory glassware and other general labware. The band of “YCHD” boiling glass series and volumetric measuring instruments are well-known all over the world.