China High quality metal Ni/Cr plated steel Support Rings Manufacture and Factory

High quality metal Ni/Cr plated steel Support Rings

Short Description:

Straightness rod support ring is made of iron plating material, plating treatment surface, durable, bright as a mirror, not rust, not variable, suitable for use with iron frame and cross clamp, used to support flask, pear shaped separation funnel and other containers.

Send email to us

Product Detail

Product Tags

Chemical Experiment Equipment

The Ring is made of Ni/Cr plated steel, for support funnels, round bottom flasks, reaction vessels and other apparatus that requires lower support.

About Ring

Product Specification

Close Ring retort support

Code	Ring Dia.	Length
HO310-60	60mm	180mm
HO310-80	80mm	195mm
HO310-100	100mm	200mm
HO310-120	120mm	215mm
HO310-140	140mm	225mm

Close Ring HO330

Code	Ring Diam.
HO330-50	50mm
HO330-60	60mm
HO330-80	80mm
HO330-100	100mm
HO330-120	120mm
HO330-140	140mm

Open Ring HO320

Code	Ring Diam.
HO320-50	50mm
HO320-60	60mm
HO320-80	80mm
HO320-100	100mm
H0320-120	120mm
HO320-140	140mm

Notes for Use

(1) when the instrument is fixed on the iron platform, it is generally carried out in the order from the bottom to the top. If you want to use an iron clip to hold the test tube. Should be clamped against the nozzle. When fixing the flask, it should be clamped at the burning neck and properly tightened.

(2) The direction of the iron clip and iron ring should be consistent with the base of the iron frame to increase stability.

Avoid contact with acid and alkali in use. In case of carelessness, rinse and wipe in time. The screw should always be lubricated with a small amount of grease. Be sure to keep the rotation flexible, easy to use.

[Precautions]

1. This product can be used repeatedly.

2, the product should be kept clean, prohibited from contact with acid, alkali, organic solvents and other substances, and 1.5 meters away from the heat source.

3. This product should be stored in a dry and ventilated warehouse with a temperature of 0-35°C and a relative humidity of no more than 80%. The product should be placed on the ground above 0.2cm.

About Support Rings

Product name: Support Rings

Material: High quality metal

Specification: 3*1 (large/medium/small)

Product introduction:

Support Rings by large, small and medium-sized three rings composed of 3*1 for a set, with high wear resistance resistance properties of heat resistance, and iron frame with use, is the application of a wide range of experimental appliances.

Product name: Support Rings

Material: iron plating + zinc alloy plating

Specification: (large/medium/small)

Product introduction:

Product Introduction

High Quauty Iron Plating

Electroplating is the use of the principle of electrolysis on the surface of the metal plating - thin layer of its iron process, is the use of electrolysis to make the metal or surface attached to a layer of metal film process so as to prevent metal oxidation (such as corrosion), improve wear resistance, electrical conductivity, reflective, corrosion resistance (copper sulfate, etc.) and enhance the role of beauty.

Material Stability

Omni-directional iron plating material, smooth surface, no scratching, excellent workmanship, with wear resistance, electrical conductivity, reflective, corrosion resistance and improve the appearance of the characteristics. The material is stable and durable. Safety and health, use more assured.